Revo R16/8/4/DVR - Manual (Page 30)

User’s Manual
24
y Daytime Setup…: Select the button and set the Daytime range. The DVR will consider the remaining time range
as the nighttime.
Alarm-In Event Settings (EVENT
¼ Alarm-In Tab)
y No.: Selecting the box toggles each alarm input On and Off.
y Type: Set each alarm input as NO (Normally open) or NC (Normally closed).
y Alarm-Out…: Select the alarm-out signals (Alarm-Out and Beep) to be associated with the alarm input. The DVR
will alert you of the event by activating an external alarm or internal buzzer when an input is detected on the selected
alarm input.
y Notify…: Select Mail if you want to send an e-mail to the address set during NETWORK – Mail setup when the DVR
detects an input on the selected alarm input.
NOTE: For the Notify action to work, the Mail should be enabled in the NETWORK – Mail setup.
DISPLAY SETUP