Revo R16/8/4/DVR - Manual (Page 15)

Digital Video Recorder
9
SEQUENCE Button
When in the Live Monitoring mode, pressing the SEQUENCE button displays live channels sequentially.
FREEZE Button
Pressing the FREEZE button freezes the current live screen.
ALARM Button
Pressing the ALARM button resets the DVR’s outputs including the internal buzzer during an alarm.
MENU Button
In the Live Monitoring mode and Search mode, pressing the MENU button displays the menu icons at the top of the
screen. Pressing the button also hides the menu icons. During menu setup, pressing the button closes the current
menu or setup dialog box
.
Up, Down, Left, Right Arrow Buttons
These buttons are used to navigate through menus and items displayed in the Live Monitoring or Search screens. They
are also used to navigate through menus and GUI during the system setup. You also can use them to change numbers by
highlighting a number in a menu and using the Up and Down arrow buttons to increase or decrease the number’s value.
The arrow buttons are also used to control Pan and Tilt when in the PTZ mode.
When in the PIP display format, pressing the Up and Down arrow buttons moves the position of the small screen
counter-clockwise and clockwise.
Pressing the Left and Right buttons moves through screen pages in the Live Monitoring mode and Search mode.
Enter Button
The
(Enter) button selects a highlighted item or completes an entry that you have made during system setup. This
button is also used to enter the Cameo mode in the Live Monitoring mode or Search mode.
PTZ Control Buttons
While in the PTZ mode, the FOCUS buttons are used for Near Focus and Far Focus, the PRESET buttons are used to
save Presets and load a Preset View, and the ZOOM buttons are used to Zoom In and Zoom Out.
PTZ Mode Button
Pressing the PTZ button enters the PTZ (Pan/Tilt/Zoom) mode which allows you to control properly configured cameras.
ZOOM Mode Button
Pressing the ZOOM button zooms the current image on the screen. A PIP with a rectangle temporarily displays showing
what area of the screen has been enlarged. You can use the arrow buttons to move the rectangle to another area.