Revo R16/8/4/DVR - Manual (Page 25)

Digital Video Recorder
19
y Enable: The DVR can be set up to send an e-mail when an event occurs. Selecting the box enables the Mail function.
You will only be able to change the settings if Mail is enabled.
y SMTP Server: Set the SMTP server IP address or domain name obtained from your system administrator.
NOTE: You will need to get the IP address or domain name of the SMTP server from your network administrator.
You can use the domain name instead of IP address if you set up the DNS server during Network setup.
y Port: Set the SMTP server port number obtained from your system administrator.
y Enable SSL/TLS: Check the box when sending an e-mail via an SMTP server requiring SSL (Secure Sockets Layer)
authentication.
y Authentication: Select the button if the SMTP server needs authentication, and set up the Authentication by selecting
the Use box and entering the user ID and password.
y Sender/Recipient: Enter the sender’s/recipient’s e-mail address. The e-mail address must include the “@” character
to be a valid address.
CAMERA SETUP
Camera Settings
y No.: Selecting the box toggles all or each camera On and Off.
y Title: Change the name of all or each camera.
y PTZ Model: Select the PTZ device you wish to configure from the list.
y ID: Set the PTZ ID of each camera.