Badger Meter ReadCenter User Manual

Page 23

Advertising
background image

May 2010

Badger

®

READCENTER

®

Installation and Operation Manual

 

Badger Meter, Inc.

— CONFIDENTIAL AND PROPRIETARY —

23

Registration

This section has information about how
the meter is read, whether electronically
or manually.

Note: Compound meters might have two
registration records associated with one
meter. Each record will have its own
Service # and be related to a separate
register.

Field Name

Type

Size

Description

Service #

Numeric

This is a required entry that identifies individual meter
readings that share the same Account ID. If not specified,
the number 1 is assumed. Here are the cases this applies
to:

 Several meters are read at one address and the

same Account ID is used.

 One Account ID is used to bill several meters in a

multiple-dwelling unit.

 A compound meter is present, and two readings

are associated with one module.

Module Type

See Appendix 4

The type of reading device associated with the meter.

Module Serial
#

Numeric

50

Identification number of the reading module attached to
the meter—required for radio and touch reading.

Gas CFactor

Numeric

10

Pressure compensation factor for Gas ORION radio
meter readings.

Module Install
Date

Date

Optional—date the reading module was installed on the
meter.

Read
Resolution

See Appendix 4

Setting required for radio and touch reading used to
determine the multiplier needed to convert electronic
readings.

Note: The multiplier varies according to the size of the
meter.

Module
Instruction

Account Table

50

Optional —table entry assigned used to associate
information about the module.

Latitude

Alphanumeric

50

Latitude position of the reading module—used by the
laptop collection device for map display.

Longitude

Alphanumeric

50

Longitude position of the reading module—used by the
laptop collection device for map display.

Received

Loaded

Sent

Yes/No

Indicates whether the account record was:

1. Received from the interface input file

2. Loaded to a collection device for reading

3. Written to the interface output file

Status Flag

Numeric

Internal status indicator collected from the reading module.

Multiplier

Numeric

Internal multiplier applied to radio and touch reads based
on the read resolution and reading module.

Advertising