Blue-White Sonic-Pro Hybrid Ultrasonic Flowmeters - Manual (Page 8)

Page 8 Sonic-Pro
Industries, Ltd. Industries, Ltd.
ProSeries
by Blue-White Ind.
TM
STANDARD MODEL FEATURES
! Data logging to a standard SD Card.
! 4-20 mA output signal
! 0-1000 Hz digital frequency output signal
! LED status indicator lights
DISPLAY AND USER ACCESS MODEL DISTINCTIONS
OPTIONAL COMMUNICATIONS PACKAGE WITH CUSTOM PC SOFTWARE
Communications Package that includes
circuitry, connector panel and custom PC software. When
software, any model can perform the functions
described in this manual including program editing and data logging downloads directly
into the PC.
OPTIONAL PROCESS CONTROL RELAY BOARD
Any Sonic-Pro model can be equipped with a
connected to a computer
running the Sonic-Pro Model S3
Any Sonic-Pro model can be equipped with a Process Control Relay Package that
includes three independently programmable 10 amp relays. However, relay programming
requires the Model S3 programming features or the Communications Software package
to function. Models S1 and S2 cannot access the relay functions unless connected to the
communications Software.
1.7
Standard
Model
Features
and Options
Sonic-Pro Model S3 includes a full featured
display with a 5 button touch pad. The start-up
process and the zero calibration can be performed
by pressing the proper buttons on the touch pad.
Sonic-Pro Model S2 includes a basic display with
a 2 button touch pad. The start-up process and the
zero calibration can be performed by removing the
front cover plate and pressing the setup button
located on the circuit board.
Note that the
Sonic-Pro Model S1 has no display or touch pad.
The start-up process and the zero calibration can be
performed by removing the front cover plate and
pressing the setup button located on the circuit
board.
Note that the start-up process, the zero calibration,
and all other functions can also be performed by the
optional remote PC software application.
start-up process, the zero calibration,
and all other functions can also be performed by the
optional remote PC software application.
Note that the start-up process, the zero calibration,
and all other functions can also be performed by the
optional remote PC software application.