PNI SeaTRAX - Manual (Page 11)

PNI Sensor Corporation DOC#1018154 r02
SeaTRAX User Manual Page 6
3.2 Mechanical Drawings
The SeaTRAX with the shield is PNI pn 13457, while without the shield the it is pn 13118.
The default orientation is for the arrowhead
to point in the “forward” direction.
Note: The full-radius cut-outs along the long sides are intended for test fixturing and not as the
mechanical mount in the user’s system. PNI recommends using an adhesive to secure the long edge of
the PCB to a shelf or lip in the user’s system. Typically SeaTRAX would be potted in the user’s system.
Figure 3-1: SeaTRAX Mechanical Drawing