Log data tab, 6 log data tab – PNI SeaTRAX User Manual
Page 37
PNI Sensor Corporation
DOC#1018154 r02
SeaTRAX User Manual
Page 32
6.6
Log Data Tab
SeaTRAX Studio can capture measurement data and then export it to a text file. To acquire
data and export it, follow the procedure below:
Select the parameters you wish to log in the “Data” window. Use Shift -Click and
Ctrl-Click to select multiple items. In the screen shot above, “Heading”, “Pitch”, and
“Roll” were selected.
Click the <Go> button to start logging. The <Go> button changes to a <Stop> button
after data logging begins.
Click the <Stop> button to stop logging data.
Click the <Export> button to save the data to a file.
Click the <Clear> button to clear the data from the window.
Note: The data logger use ticks for time reference. A tick is 1/60 second.