Mounting orientation, Figure 4-2: mounting orientations, 2 mounting orientation – PNI SeaTRAX User Manual
Page 15
Advertising
PNI Sensor Corporation
DOC#1018154 r02
SeaTRAX User Manual
Page 10
4.3.2
Mounting Orientation
The SeaTRAX can be mounted in various orientations, as shown in Figure 4-2. All
reference points are based on the white silk-screened arrow on the top side of the board.
The orientation should be programmed in the SeaTRAX using the kSetConfig command
and the kMountingRef setting, as described in Section7.3.6. The default orientation is
“STD 0°”.
Figure 4-2: Mounting Orientations
Advertising