Ampro Corporation DLP 5200 - Manual (Page 29)

Menu System
27
5200 User’s Manual
Menu-Channels Use the Channels command to access the channel management system with the
following functions.
Select Highlight the desired channel, then press Select to choose the channel for display.
Save As First highlight the desired channel, then press Save As to evoke the Save As pop-
up window. The Save As command will automatically select the next open channel
number.
Copy The Copy command provides the ability to copy from channel to another. Once
chosen, the Copy pop-up window is provided which allows you to direct from where
you want to copy from to where you want to copy to.
Delete The delete command allows you to remove any unwanted or duplicate channels.
Once selected a deletion confirmation window will presented, allow you to accept
the deletion process or abort the operation.
Find This function will first, turn on Auto-Search, then automatically “find” a new channel and
turn Auto-search back off. If Auto-Search is already “on”, this function has no effect.
Lock/Unlock This channel provides the ability to lockout any changes to channel settings. Press
this command to toggle the Lock/Unlock operation. The status of the Lock/Unlock
function is display in the main Channel command bar (above). Once activated a
confirmation window will appear.
Activate / Deactivate This command allows you to remove the desired channel or channels from the look-
up list used by the Auto-Search function. If a channel is tagged “deactivated” then
Auto-search will bypass this particular channel during the Auto-Search process.
Use this button to toggle the state of the highlighted channel. The user will be
presented with a confirmation window.