Ampro Corporation DLP 5200 - Manual (Page 34)

Installation, Lens Adjustments and Lens Data Tables
32
5200 User’s Manual
Optical Adjustments
Lens Shift
Adjuster
The lens shift is adjusted by turning the lens shift knob located at the front of the projector.
Adjust the lens shift until the image is centered within your screen area. See Below. Refer to
the Lens Specifications for the maximum amount of lens shift for your particular lens.
Lens Focus
Adjuster
To focus the image, turn the lens focus knob (near the lens shift adjuster) to fine tune the
lens focus. Adjust the knob until optimal focus is achieved. See Figure below.
Zoom Lens
Adjustment
Open the top cover to access the zoom lens adjustment ring. The top cover may be unlocked
by turning the two ¼ turn captive screws on both sides on the projector, close to the front of
the projector. The actual adjustment ring is under the lens bezel. Grab the gray ring around
the lens and rotate it back-and-forth until the proper or desired image size is achieved. See
Figure below. Refocus the lens if necessary.