AMX SIP Communications Gateway CSG-500 - Manual (Page 59)

Telephone System Configuration
51 CSG SIP Communications Gateway Operation/Reference Guide
The double left arrows will move all available users to this page/intercom group. The double right arrows will
remove all page/intercom group members. The single left arrow will be move an individual available user to
the page/intercom group. The single right arrow will remove an individual page/intercom group member.
Click Save to retain your page/intercom group, or Cancel to abandon your changes. From the Paging &
Intercom
page, you can either Edit or Delete a page/intercom group.
Click Page an Extension along the top to configure a key sequence which initiates a page or intercom call to a
specific extension.
The following settings are available:
Click Save to retain your changes, or Cancel to abandon them.
Then click Settings along the top to specify additional settings for paging and intercom.
The following setting is available:
Click Save to retain your changes, or Cancel to abandon them. Once you have completed making changes to
the Paging & Intercom sections, click Apply Changes to make them immediately available.
FIG. 44 Settings for Paging Individual Extensions
Page an Extension Options
Prefix for Paging
an Extension Specify the key sequence used to prefix a page call to a specific
extension. For example, setting this value to ** would allow you to
initiate a page call to extension 6000 by dialing **6000.
Prefix for Dialing
an Extension as
intercom Specify the key sequence used to prefix an intercom call to a
specific extension, For example, setting this value to *# would
allow you to initiate an intercom call to extension 6000 by dialing
*#6000.
FIG. 45 Paging & Intercom Settings
Settings Options
Alert-Info Header This is the value that is sent in the alert info header to the phone
for an intercom call. It is not recommended that this value be
changed from the default of Intercom.