AMX SIP Communications Gateway CSG-500 - Manual (Page 77)

Device Configuration
69 CSG SIP Communications Gateway Operation/Reference Guide
Device Configuration
AMX Modero panels feature on-board Setup pages and Metreau Entry Communicators use a web
console that you can use to access device information and make various configuration changes. The
MVP-8400i, MVP-5200i, NXD-700Vi, NXD-1000Vi panels and the MET-ECOM entry communicator
support SIP calls, so you can use these models with your CSG. This chapter only covers the pages
necessary to help you configure your touch panel or entry communicator for use with the CSG. For more
information about other features on these setup pages, consult the instruction manual for your specific
device at www.amx.com.
Touch Panel Setup Pages
On the main Setup page on your touch panel, press Protected Setup (FIG. 64) to access the Protected
Setup page.
The Protected Setup page provides secure access to advanced panel configuration options, including
communication and security settings. Enter your password or the factory default password (1988) into
the password keypad to access this page.
The Protected Setup Navigation buttons appear on the left of the panel screen when the Protected Setup
page is active.
Other Settings Slide Out Menu
The Other Settings button (FIG. 65) provides a slide out menu with the option to select the SIP Settings
page. Select SIP to access the SIP Settings page.
The options on the SIP Settings page (FIG. 66) enable you to establish network settings for using your
touch panel as an IP phone. You may need to load a Duet module to enable the touch panel to receive SIP
calls. The Duet module translates between the standard interface and the device protocol. It parses the
buffer for responses from the device, sends strings to control the device, and receives commands from
the UI module or telnet sessions. Refer to the documentation supplied with the Duet Module for more
details.
FIG. 64 Protected Setup button
FIG. 65 Other Settings slide out menu
A sample UI module is provided in the Voice and Video Communications Module
package. It is not intended to cover every possible application, but can be expanded
as needed by a dealer to meet the requirements of a particular installation.