Adding service providers – AMX SIP Communications Gateway CSG-500 User Manual

Page 32

Advertising
background image

Telephone System Configuration

24

CSG SIP Communications Gateway Operation/Reference Guide

Adding Service Providers

You must configure a VoIP service provider to connect to the Public Switched Telephone Network (PSTN) via
a VoIP connection. Access to the PSTN gives you the ability to place calls to telephone numbers no matter
how they connect to the PSTN (VoIP or standard analog system). Click the Service Providers tab to add a
VoIP (SIP or IAX) service provider.

The list of VoIP service providers and corresponding configuration information is pulled dynamically from a
secure AMX webservice. If you are already a VoIP provider customer, select the provider from the list, click
Add,

and input your user name and password. Once you have added a service provider it will appear in the

Service Providers list. There are Edit and Delete buttons associated with each Service Provider listing. Click
Edit

to further refine your service provider definition. A detailed definition will be displayed.

The Edit Service Provider page gives you the ability to change your caller ID, as well as select a range of
codecs.

Click Update when you have completed your changes, or Cancel to discard your changes.

FIG. 16

Add New Service Provider

FIG. 17

Edit VoIP Service Provider

Edit Service Provider Page Options

Option

Description

Username/
Password

You will need to provide your log on credentials to update your
service provider information.

Caller ID

The caller ID sent to the PSTN will be set to the value specified in
this field.

Codecs

Codecs provide the ability for your voice to be converted to a
digital signal and transmitted across the Internet. The quality of
your call can be affected by the choice you make. The codecs
available to you will depend on what is supported by the service
provider you choose. You can select the order in which the
codecs are used. The codecs commonly available are u-law,
a-law, GSM, G.726, G.722, and G.729A. A registered G.729A
license is required to use the G.729A codec.

Advertising
This manual is related to the following products: