AMX SIP Communications Gateway CSG-500 - Manual (Page 33)

Telephone System Configuration
25 CSG SIP Communications Gateway Operation/Reference Guide
Adding VoIP Trunks
If you do not have a subscription with one of the VoIP providers listed above, or you have a special VoIP setup,
you can add a custom VoIP trunk. Click the VoIP Trunks tab to add a VoIP (SIP or IAX) service provider. The
Create New SIP/IAX Trunk
page will be displayed.
Fill in the initial SIP/IAX trunk definition with the following information:
Click Add once you have completed your definition, or Cancel to discard your changes.
Once you have added a VoIP trunk it will appear in the SIP/IAX trunks list. There are Edit and Delete buttons
associated with each VoIP trunk listing. Click Edit to further refine your trunk definition.
FIG. 18 Create New SIP/IAX Trunk Definition
Create New SIP/IAX Trunk Page Options
Option Description
Type Select either the SIP or IAX protocol:
• SIP - Identifies that the trunk sends and receives calls using the
VoIP protocol SIP.
• IAX - Identifies that the trunk sends and receives calls using the
VoIP protocol IAX.
Provider Name The hostname or IP address assigned to the VoIP provider or
server.
Username/
Password You will need to provide your log on credentials to the VoIP trunk
server.
Note: If your VoIP trunk does not require a username, you may
leave the username field blank.
FIG. 19 Edit VoIP Trunk