AMX SIP Communications Gateway CSG-500 - Manual (Page 75)

Telephone System Configuration
67 CSG SIP Communications Gateway Operation/Reference Guide
Language
The Language tab gives you the ability to specify the default language for all prompts for phone to phone,
inbound, and outbound calls. If a soundpack selection is made, but the soundpack is not already installed, the
soundpack will be downloaded from the AMX website. English, Spanish, and French prompts are loaded by
default.
Change Password
The Change Password tab gives you the ability to change your administrator password.
Factory Reset
The Factory Reset tab gives you the ability to reset your CSG to the factory defaults.
General Preferences Tab Options
VoIP Phone Digit
Map This option gives you the ability to define a global digit mapping
string compatible with RFC 3435, section 2.1.5, to be used with
VoIP phones provisioned by this system. There is no default
setting, and this option does not sync with the dialplan assigned
to an individual user. The following examples should assist in
writing an acceptable digit mapping string.
• [2-9]11 - Calls beginning with digits 2-9, followed by digits 11,
are dialed immediately.
• 0T - Calls beginning with digit 0 are dialed after the Digit
Timeout is reached.
• +011xxx.T - Calls beginning with the + character, followed by
011 digits, and then at least three more digits before any
arbitrary number is matched, are dialed after the Digit Timeout
is reached.
• 0[2-9]xxxxxxxxx - Calls beginning with 0, followed by any digit
from 2-9, followed by 9 more digits, are dialed immediately.
• +1[2-9]xxxxxxxx - Calls beginning with the + character,
followed by 1, followed by any digit from 2-9, followed by 8
more digits, are dialed immediately.
• [2-9]xxxxxxxxx - Calls beginning with any digit from 2-9,
followed by 9 more digits, are dialed immediately.
• [2-9]xxxT - Calls beginning with any digit from 2-9, followed by
three more digits, are dialed after the Digit Timeout is reached.
These examples would be represented in this option entry box as:
[2-9]11|0T|+011xxx.T|0[2-9]xxxxxxxxx|+1[2-9]xxxxxxxx|[2-
9]xxxxxxxxx|[2-9]xxxT
Each entry is separated by the | character. For more information,
please refer to RFC 3435.
VoIP Phone Digit
Timeout This option specifies the number of seconds the phone will wait
after a digit is dialed before trying to establish a call when a digit
map pattern has not been matched. This must be defined as an
integer.
Extension
Preferences This section gives you the ability to define the numerical range for
all extension types.
If you reset your CSG to factory defaults, you will lose all configuration changes. Be
sure to make a backup of your configuration before resetting your CSG.