Avocent Network Device SPC420 - Manual (Page 129)

Chapter 7: Units View Windows 109
For example, a target device that is only attached to a serial console appliance will not contain
a KVM Session link. If a target device has a connection to both a serial console appliance and
a KVM switch, a KVM Session link will appear.
As shown in Figure 7.1, other available actions that have been enabled may be accessed by
clicking the Alternate Actions arrow to the right of the action with the highest precedence.
Clicking on one of the displayed links will launch the corresponding window type.
Figure 7.1: Alternate Actions Arrow in a Units View Window
Table 7.2: Action Links
Action link Displays Valid for*
KVM Session Video Viewer window
TDs attached to KVM switch channels/
ports
Exclusive KVM
Session
Video Viewer window (this link only
appears when Alternate Action arrow is
selected)
TDs attached to KVM switch channels/
ports
Embedded Session Viewer window
Supported versions of IBM ASM RSA II,
DRAC 4 and NEC IPF embedded units
IPMI Session IPMI Viewer window IPMI TDs
Serial Session
Opens a Telnet session window using
the configured application
Target devices
Browser Session Web browser
EVR1500 environmental monitors,
generic appliances, standalone TDs
and TDs attached to serial console
appliances, HP iLO embedded unit or
KVM switch ports
Telnet Session
Telnet Viewer window or third party
Telnet view window
EVR1500 environmental monitors,
generic appliances, standalone TDs
and TDs attached to serial console
appliances, HP iLO embedded unit or
KVM switch ports
Action
KVM Session
KVM Session
Action
Action
Action
KVM Session
V
V
V
V
V
V
V
V
V
V
V
V
KVM Session
Exclusive KVM Session
Browser Session
Telnet Session
Click on the Alternate Actions
arrow to display a list of all
available connection methods.
Click on an action to launch the
corresponding window.