Avocent Network Device SPC420 User Manual
Page 162
142 DSView 3 Software Installer/User Guide
To change the contact properties for one or more units from a Units View window:
1.
In a Units View window (see Accessing Units View windows on page 106), click the checkbox
next to the unit(s). To change contact properties for all units in the page, click the checkbox to
the left of Name at the top of the list. (If the page contains units that do not support contact
properties, they will not be affected.)
2.
Click Operations, then select Properties from the drop-down menu.
3.
The Multiple Unit Properties window will open.
•
To change the primary contact information, click Primary Contact. Type names and phone
numbers for the primary contact.
•
To change the secondary contact information, click Secondary Contact. Type names and
phone numbers for the secondary contact.
4.
Click Save and then click Close. The Units View window will open.
To change the custom fields for a unit:
1.
In a Units View window (see Accessing Units View windows on page 106), click on the
appliance or target device name.
2.
Click Properties in the side navigation bar, then click Custom Fields in the side navigation bar.
The Unit Custom Fields window will open. To change information, type the information in
each of the custom fields.
3.
Click Save and then click Close. The Units View window will open.
To change the custom fields for one or more units from a Units View window:
1.
In a Units View window (see Accessing Units View windows on page 106), click the checkbox
next to the unit(s). To change custom fields for all units in the page, click the checkbox to the
left of Name at the top of the list. (If the page contains units that do not support custom fields,
they will not be affected.)
2.
Click Operations, then select Properties from the drop-down menu.
3.
The Multiple Unit Properties window will open. Click Custom Fields.
4.
Type the information in each of the custom fields.
5.
Click Save and then click Close. The Units View window will open.
To change the note properties for a unit:
1.
In a Units View window (see Accessing Units View windows on page 106), click on the
appliance or target device name.
2.
Click Properties in the side navigation bar and then click Notes in the side navigation bar. The
Unit Notes window will open. Type description, accounting and comment information.
3.
Click Save and then click Close. The Units View window will open.