Avocent Network Device SPC420 - Manual (Page 246)

226 DSView 3 Software Installer/User Guide
Reports, events and data logging actions in a zone
Add authentication services Any qualified user
Active zone only.
NOTE: The same authentication
service cannot be reused in
multiple zones. The authentication
service must be added to each
zone where it will be used. As a
result, virtual users may end up in
multiple zones, but each instance of
the user in a zone is treated as
unique user in the DSView 3
software system.
Move authentication services Not permitted for any user
An authentication service cannot be
moved to another zone.
NOTE: An authentication service is
permanently owned by the zone
that was active when the
authentication services was added.
If necessary, you can delete an
authentication service from its zone
and recreate it in another zone
Assign unit access rights to users Any qualified user
Active zone only. Both the user and
unit must belong to the active zone.
Assign users to groups Any qualified user
Active zone only. Both the user and
group must belong to the active
zone.
View effective rights for users Any qualified user Active zone only.
Table 16.3: Reports, Events and Data Logging Actions in a Zone
Action User Status Required for Action Zone(s) Affected
View system logs and events Any qualified user
For all zones for which he has
access rights.
View or export data logs Any qualified user Active zone only.
View and modify email notifications Any qualified user Active zone only.
Modify log retention Super users only All zones.
Modify events Super users only All zones.
View usage and asset reports Any qualified user Active zone only.
Table 16.2: User Actions in a Zone (Continued)
Action User Status Required for Action Zone(s) Affected