Avocent Network Device SPC420 - Manual (Page 380)

360 DSView 3 Software Installer/User Guide
Figure B.4: Ports Used with a Serial Console Appliance Proxy Server Connection (Serial)
DSView 3 server ports
The DSView 3 server uses the HTTPS port for communication with clients and spoke servers.
Changes made to the browse list through the DSView 3 management software are transmitted back
to the DSView 3 server host, which refreshes its browse list view over the TCP/IP port 443
connection. Changes to the DSView 3 software are also copied to and from the DSView 3 software
hub server over the specified HTTPS port.
Generic appliance ports
If you are using a generic appliance in your DSView 3 software system, you may use a Telnet
connection through TCP/IP port 23, or an HTTP connection through TCP/IP port 80. The
connection is made directly between the client and the generic appliance.
TCP/IP
Serial Console Appliance
DSView 3 Server
DSView 3 Software Client TCP/IP
HTTPS
Firewall
1078
Serial
with
Tunnel
TCP/IP
Port 3871
TCP/IP
Port 3211
UDP
Port 3211
TCP/IP
Port 22
Router
TCP/IP
HTTPS
Port 443
TCP/IP
Port 1078