Avocent Network Device SPC420 User Manual
Page 282
262 DSView 3 Software Installer/User Guide
color depth value than the current setting. When disabled, users may not select a higher
value, but they may select a lower value.
c.
In the Video Scaling field, choose the desired value. Enable or disable the Allow users to
override these settings checkbox.
If users are allowed to override this setting, you may also enable or disable the Prohibit
users from selecting a higher value checkbox. When enabled, users may select a higher
video scaling value than the current setting. When disabled, users may not select a higher
value, but they may select a lower value.
d.
In the Background Refresh field, enable or disable background refresh. Enable or disable
the Allow users to override these settings checkbox.
e.
If you changed any settings, click Save.
9.
Click Close.
To delete one or more KVM session profiles:
NOTE: The default KVM Session Profile cannot be deleted.
1.
Click the Units tab.
2.
Click Profiles in the top navigation bar.
3.
To delete one or more profiles, click the checkbox to the left of the profile name. To delete all
profiles except the Default KVM Session Profile, click the checkbox to the left of Name at the
top of the list.
4.
Click Delete. A confirmation dialog box will appear.
5.
Confirm or cancel the deletion.
To assign a KVM session profile to a target device:
1.
In a Units View window containing target devices (see Accessing Units View windows on
page 106), click on the target device name.
2.
Click Properties in the side navigation bar, then click Profiles in the side navigation bar. The
Profiles window will open.
3.
Select the desired profile.
4.
Click Save and then click Close.
To assign a KVM session profile to multiple target devices:
1.
In a Units View window containing target devices (see Accessing Units View windows on
page 106), click the checkbox next to one or more target devices. To change the KVM session
profile for all target devices in the page, click the checkbox to the left of Name at the top of the
list.
2.
Click Operations, then select Properties from the drop-down menu.
3.
The Multiple Unit Properties window will open. Click Profile.