Avocent Network Device SPC420 User Manual
Page 139
Chapter 8: Adding and Deleting Units 119
•
For an HP iLO embedded appliance, go to step 6.
•
For an NEC IPF embedded appliance, go to step 7.
4.
For IBM ASM RSA II embedded appliances:
a.
The Configure IBM ASM RSA II Settings window will open.
b.
In the Appliance Name field, type a 1-64 character appliance name. The name is not case
sensitive.
c.
In the Address field, type a 1-256 character IP address in dot notation form or a DNS
name. The address is not case sensitive.
d.
In the Username field, type a 1-64 character username to be used to log in to the embedded
appliance. Usernames are case sensitive.
e.
In the Password field, type a 1-64 character password to be used to log in to the embedded
appliance. Passwords are case sensitive.
f.
Click Next.
g.
The embedded device discovery will verify that a web server exists at the specified IP
address. If successful, the Select Option window will open.
h.
Enable or disable the Allow target devices with the same name to be merged into a single
target device checkbox.
i.
Click Next. Go to step 8.
5.
For DRAC 4 embedded appliances:
a.
The Configure DELL DRAC4 Settings window will open.
b.
In the Appliance Name field, type a 1-64 character appliance name. The name is not case
sensitive.
c.
In the Address field, type a 1-256 character IP address in dot notation form or a DNS
name. The address is not case sensitive.
d.
In the Port field, type a TCP port number in the range 0-65535 where the appliance will
listen.
e.
In the Username field, type a 1-64 character username to be used to log in to the embedded
appliance. Usernames are case sensitive.
f.
In the Password field, type a 1-64 character password to be used to log in to the embedded
appliance. Passwords are case sensitive.
g.
Click Next.
h.
The embedded device discovery will verify that a web server exists at the specified IP
address. If successful, the Select Option window will open.
i.
Enable or disable the Allow target devices with the same name to be merged into a single
target device checkbox.
j.
Click Next. Go to step 8.
6.
For HP iLO embedded appliances: