Avocent Network Device SPC420 - Manual (Page 381)

Appendices 361
Figure B.5: Generic Appliance Session Ports
If Active Directory or LDAP external authentication is being used within your DSView 3 software
system, TCP/IP ports 389 and 636 are used for connections between the DSView 3 server and the
external authentication server. Port 389 is typically used for non-SSL connections and port 636 is
used for SSL connections. You may configure the ports used by an Active Directory or LDAP
external authentication server using the Authentication Service Connection Settings window. See
Authentication Services on page 60.
TCP/IP
HTTPS
TCP/IP
Port 23
HTTP
Generic Appliance
DSView 3 Server
DSView 3 Software Client
Port 80