ADIC SNC 5100 - Manual (Page 214)

SNC 5100
206 Bootrom Messages
6-00020-02
LIC Initialization Messages
After the BootLoader finds and loads the licensed internal code (LIC), the
BootLoader will transfer control and start SNC 5100 operations. See the
sample code below.
Host Name: bootHost
User: buckhorn
Attached TCP/IP interface to ibmEmac unit 0
Attaching network interface lo0... done.
NFS client support not included.
Adding 8123 symbols for standalone.
SDRAM DIMM: 128 Meg - 1 banks detected
Enabling MMU Data Translation
Firmware-4
Version 0401.5 Built Feb 1 2001, 17:23:51 on redsky for Buckhorn
- IBM PowerPC 405GP Rev. D
Product Type - ADIC FCR2
Copyright ADIC, 1994-2001
VxWorks 5.4 WIND version 2.5BSP 1.2/4a
Copyright Wind River Systems, Inc., 1984-2000
Memory Size: 0x2000000
/nvfs/ - disk check in progress ...
/nvfs/ - Volume is OK
total # of clusters: 1,008
# of free clusters: 935
# of bad clusters: 0
total free space: 478,720
max contiguous free space: 478,720 bytes
# of files: 5
# of folders: 10
total bytes in files: 29,785
# of lost chains: 0
total bytes in lost chains: 0
Executing startup script /ffs/sna.rc ...
#! /bin/csh -f
CNFinit
value = 0 = 0x0