ADIC SNC 5100 - Manual (Page 52)

SNC 5100
44 Start MAP
6-00020-02
Step 4. If LED observations did not solve the problem, proceed to "Check
for Problems on Attached Devices" .
Check for Problems on Attached Devices
Check the following in order to find problems on attached devices:
• LEDs
• Display panels
• Firmware levels
• Operability
Check Host Versions
Check the following in order to find problems on attached Hosts:
• Operating system version
• Service pack version
• Hot-fix version
• HBA hardware version
• HBA firmware version
• HBA device driver version
If an update is required, perform the update.
For an updated list of supported SNC 5100 host platforms and Fibre Channel
Host Bus Adapters, visit www.adic.com.
Check SNC 5100 Product Versions
For an current list of required updates, visit www.adic.com.
ADIC Management Console version
Use this procedure to check the version level of the ADIC Management
Console application.