HP Deskjet 990cxi Printer User Manual
Page 55
Advertising
55
Problems?: Troubleshooting Tips
When I connect a USB
cable between the printer and
my computer, an “Unknown
device” message appears.
• Static electricity has built up in
the cable between your
computer and printer.
OR
• You may have a defective USB
cable.
1
Disconnect the USB cable from your printer.
2
Unplug the printer from its power cable.
3
Wait approximately 30 seconds.
4
Plug the power back into the printer.
5
Plug the USB cable back into the printer.
6
If “Unknown device” continues to appear in the “New hardware found”
dialog box, replace the USB cable or use a parallel cable.
The printer software won’t install, what’s wrong? Continued
What is the problem?
Possible cause
To solve the problem…
Advertising