HP Deskjet 990cxi Printer - Manual (Page 72)

72
Problems?: Troubleshooting Tips
Automatic Two-Sided Printing
was selected, but printing is
only on one side of the paper. The application you are using to
print supports only manual two-
sided printing. It does not support
Automatic Two-Sided Printing. Print using the manual two-sided printing feature. See “Manual Two-Sided
Printing” on page31.
You have Automatic selected as
the paper type and are using a
media type that is not supported by
the Automatic Two-Sided Printing
Module.
Switch to a media type supported by the Automatic Two-Sided Printing
Module or use manual two-sided printing. See “Automatic Two-Sided
Printing Module Specifications” on page 83 or “Manual Two-Sided Printing”
on page31.
You are using a media size that is
not supported by the Automatic
Two-Sided Printing Module. Switch to a media size supported by the Automatic Two-Sided Printing
Module or use manual two-sided printing. See “Automatic Two-Sided
Printing Module Specifications” on page 83 or “Manual Two-Sided Printing”
on page31.
The binding margin appears in
the wrong place. You may not have chosen the
correct paper orientation. Check the Features tab to ensure you have chosen the correct paper
orientation for Two-Sided Printing—either Book or Tablet . See “Features
Tab” on page9.
Is there a problem with your Automatic Two-Sided Printing Module? Continued
What is the problem? Possible cause To solve the problem…