HP Designjet 3D Printer series - Manual (Page 67)

63
Pr
inter
S
pec
ific
ations
Printer Specifications
The information in this section is applicable to both HP Designjet 3D and HP Designjet Color 3D
printers.
Physical specifications
Facility specifications
Height 30 in (762 mm)
Width 26 in (660 mm)
Depth 26 in (660 mm)
Weight 130 lbs (59 kg)
Material bay height 6 in (153 mm)
Material bay width 26 in (660 mm)
Material bay depth 26 in (660 mm)
Material bay weight 37 lbs (17 kg)
Installation location Stable flat surface capable of holding 220 lbs (100 kg), with a height
clearance of 36 - 40 in (90 - 100 cm).
Note - if using additional material bay:
Stable flat surface capable of holding 260 lbs (120 kg), with a height
clearance of 46 - 50 in (117 - 127 cm).
Power Requirements 100–240VAC ~ 12 - 7A 50/60Hz 1200W dedicated circuit within 80 in (2
m)
Do not use an extension cord or a power strip, using these can possibly
cause intermittent power issues.)
Air Circulation 4.5 in (115 mm) minimum space behind printer for air circulation.
6 in (153 mm) minimum space around printer for air circulation.
Network Connection Ethernet 10/100 Base T within 14 ft (4m).