HP Designjet 3D Printer series - Manual (Page 72)

68
Suppl
em
ental Inf
orm
ation
Declaration of conformity
according to ISO/IEC 17050-1 and EN 17050-1
declares that the product
conforms to the following product specifications
The product herewith complies with the requirements of the Low-Voltage Directive 2006/95/EC
and the EMC Directive 2004/108/EEC, and carries the
marking accordingly. In addition,
it complies with the WEEE Directive 2002/96/EC and RoHS Directive 2002/95/EC.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause
undesired operation.
Additional information
The product is assigned a Regulatory Model Number which stays with the regulatory aspects of
the design. The Regulatory Model Number is the main product identifier in the regulatory
documentation and test reports; this number should not be confused with the marketing name or
the product numbers.
Local contacts for regulatory topics only
http://www.hp.com/go/certificates/
EMEA contact: Hewlett-Packard GmBH, HQ-TRE, Herrenberger Strasse 140, 71034 Böblingen,
Germany.
USA contact: Hewlett-Packard Company, Corporate Product Regulations Manager, 3000
Hanover Street, Palo Alto, CA 94304, USA. Phone: (650) 857 1501.
Declaration of conformity number BCLAA-0903
Supplier’s name:
Hewlett-Packard Company
Supplier’s address: Cami de Can Graells, 1-21
08174 Sant Cugat del Vallès
Barcelona, Spain
Product name and
model:
HP Designjet 3D printer series
HP Designjet Color 3D printer series
Regulatory Model
Number(1): BCLAA-0903
Product options: All
Safety: IEC 60950-1:2007 (2nd Edition) / EN 60950-1:2007
CAN/CSA-C22.2 No. 60950-1-07 / UL 60950-1:2007
EMC: EN 55022:2006 / CISPR 22:2005 Class A
EN 55024:1998 + A1:2001 + A2:2003
EN 61000-3-2:2006 / IEC 61000-3-2:2005
EN 61000-3-3:1995 + A1:2001 + A2:2006 / IEC 61000-3-3:1994 +
A1:2001
FCC Title 47 CFR, Part 15 Class A