HP Designjet 3D Printer series - Manual (Page 69)

65
Suppl
emental Inf
or
m
ation
Supplemental Information
HP Designjet 3D and HP Designjet Color 3D Printer series
Hewlett Packard Limited Warranty Statement
A. Extent of HP Limited Warranty
1. HP warrants to you, end-user customer, that the HP hardware products, accessories and
supplies specified above will be free from defects in materials and workmanship under
normal usage during the Limited Warranty Period specified above. The Limited Warranty
Period starts on the date of purchase by you. Your dated sales or delivery receipt, showing
the date of purchase of the product, is your proof of purchase date. You may be required to
provide proof of purchase as a condition of receiving warranty service.
2. For software products, HP’s Limited Warranty applies only to a failure to execute
programming instructions for the Limited Warranty Period specified above, due to defects in
material, and workmanship when properly installed and used on the device designated by
HP. HP further warrants that HP owned standard software will substantially conform to
specifications. HP does not warrant that software will operate in hardware and software
combinations selected by you, or meet requirements specified by you.
3. HP does not warrant that the operation of any product will be uninterrupted or error free.
4. HP’s Limited Warranty covers only those defects that arise as a result of normal use of the
HP products, and does not cover any other problems, including those that arise as result of:
a. Improper or inadequate maintenance or calibration;
b. Accessories, software, interfacing, paper, parts, ink or supplies
not provided or supported by HP; a l
c. Operation outside the product’s specifications;
d. Improper site preparation or maintenance; or
e. Unauthorized modification or misuse.
Routine printer maintenance operations in the HP Printer, such as cleaning and preventive
maintenance services (including parts contained in any preventive maintenance kit and HP
service engineer visits), are not covered by HP’s Limited Warranty.
HP Product Limited Warranty Period
HP Designjet 3D Printer
HP Designjet Color 3D Printer
HP Designjet 3D Material Bay
HP Designjet 3D ABS Material 1 year
HP Designjet 3D Software Solution 90 days