HP Officejet 600 All-in-One Printer - Manual (Page 112)

7-14
No fax answered There were no
answering fax tones at
the receiving fax
machine.
Or the phone cord may
not be properly
plugged in.
Check to make sure you faxed
to the correct number, then try
sending the fax again.
If the recipient needs to
receive faxes manually, you
may need to call to notify the
recipient that you’re sending a
fax.
Also, check to see if the
phone cord is properly
inserted to both the HP
OfficeJet and the wall jack.
No group send You have begun real-
time dialing, and you
entered a speed dial
code that’s been
assigned to a group of
fax numbers.
In this situation, faxing
to a group is not
allowed.
Use the dialing instructions in
the “Speed dialing” on page
3-4.
Off hook... You pressed the Start
button, and this gives
you a dial tone so that
you can begin real-time
dialing to send a fax.
Begin dialing the fax number
to send a fax using the real-
time dialing method.
For step-by-step, illustrated
instructions, refer to “Dialing
in real time” on page 3-3.
Phone off-hook You lifted the receiver
of a phone that’s
attached directly to the
HP OfficeJet, and you
have a dial tone. Begin dialing a phone or fax
call at any time.
This keypad
message:
Has this meaning:
And this action is
recommended: