HP Officejet 600 All-in-One Printer - Manual (Page 79)

4-7
4.
C
o
p
yin
g
Reducing and enlarging
When you want the copy to be smaller or larger than your original
document, change the Reduce/Enlarge setting.
Copy quality
The Copy Quality determines the print mode for your copy.
●
Normal is the factory-set quality. It has medium quality and
medium speed: 2.5 pages per minute (ppm) for monochrome
printing, and 0.7 ppm for color printing.
● Choose EconoFast for draft quality and the fastest speed: 4 ppm
for monochrome printing, and 1 ppm for color printing.
● Choose Best for the highest quality output. It has the slowest
speed: 1 ppm for monochrome printing, and 0.3 ppm for color
printing.
For help choosing the right quality, click What is the right Quality
for me? in the Copy Settings dialog box for a description of each.
Reduce/Enlarge* method: Settings available:
Change the number in the
entry box.
(Factory setting = 100%)
Enter a number between 50 and 200 to
reduce to as small as half of the original
size or to enlarge to up to twice the size.
Choose from the selection
box.
(Factory setting = Actual size)
Fit to Page reduces the original to fit the
entire page within the print margins of the
HP OfficeJet.
Actual Size makes the copy the same size
as your original.
Legal to Letter reduces the original from
legal-size to letter-size.
Letter to A4 reduces the original from
letter-size width to A4-size width.
A4 to Letter enlarges the original from
A4- size width to letter-size width. (Make
sure you have letter-size paper in the paper
supply tray when you choose this setting,
or your copy will print on multiple pages.)
Drag the slider bar.
(Factory setting = 100%) Drag to a number between 50 and 200
to reduce to as small as half the original
size or to enlarge to up to twice the size.
* If you enlarge to a size that won’t fit on the paper you have loaded, your copy
will be printed on multiple pages.