HP Officejet 600 All-in-One Printer - Manual (Page 63)

3-17
3. Faxing
Changing the information printed at the top of the
faxes you send
When you first installed the HP OfficeJet software, you were asked to
enter your name and fax number. This information was stored for use
in the header that’s printed at the top of all of your outgoing faxes.
Notes:
● Only the fax recipient will see this information upon receipt of
your fax; it’s not printed on your original document.
● The Telephone Consumer Protection Act of 1991 requires that, in
the U.S., all outgoing faxes identify the originator’s name and fax
number in a header, footer, or on the cover page of the outgoing
fax.
Use the following procedure to change the fax header information.
Double-click HP OfficeJet Manager on your Windows desktop.
Click Fax and select Send Settings .
Click the Personal Information tab and change the information
in the two entry boxes in the Fax Header Content section.
Setting Tone or Pulse dialing type
The HP OfficeJet is factory-set for tone dialing. Nearly all phones
being used in the U.S. have tone dialing.
Note: Don’t change this setting unless you know your phone isn’t
capable of tone dialing. Pulse dialing is much slower than tone
dialing.
Double-click HP OfficeJet Manager on your Windows desktop.
Click Fax and select Send Settings .
Click the Dialing tab and select Tone Dial or Pulse Dial in the
Phone Dialing Type section.
1
2
3
1
2
3