HP Officejet 600 All-in-One Printer - Manual (Page 60)

3-14
Entering a pause during keypad dialing
Press the Redial/Pause button to enter a 2-second pause in the middle
of your dialing sequence. A dash (-) will appear on the message
display, indicating where the pause will occur in the dialing sequence.
Notes:
● Refer to the instructions in “Dialing in real time” on page 3-3.
● If you press Redial/Pause at any other time except while dialing
a fax number, the manual Redial feature takes effect (see
description in previous section).
Assigning speed dial codes
The number of speed dial codes you have depends upon the model
number of your HP OfficeJet. Your model number is displayed on
your keypad.
Assigning a speed dial code to a single fax number
Use speed dial codes to store frequently used fax numbers.
Double-click HP OfficeJet Manager on your Windows desktop.
Click Fax and select Phone Book .
Do either of the following.
●
To create a new phone book name:
Enter any name and number information, then click the arrow
next to the Speed Dial entry box and select a speed dial code.
●
To add a speed dial code to an existing phone book name:
Click the name in the list and select a speed dial code.
Click Add to Phone Book (for new phone book names) or
Apply Changes (for existing phone book names) to save the
information you just entered.
See “Speed dialing” on page 3-4 for speed dialing instructions.
Model number Number of speed dial codes available
Model 600 100
Model 610 50
Model 630 100
1
2
3
4