Insert the print cartridges – HP Officejet 600 All-in-One Printer User Manual
Page 13
1-5
1. Se
ttin
g Up
5.
Insert the Print Cartridges
●
After you plug in the power, the HP OfficeJet powers up
automatically. The display on the keypad will read, “Insert Color
Cartridge.”
●
Wait until the HP OfficeJet finishes start-up (about 10 seconds),
then open the
cover
of the HP OfficeJet. The empty print
cartridge holder moves into view.
●
Remove the
color
print cartridge from its
packaging. Holding the blue top of the
cartridge, gently remove both pieces of tape
— clear blue and solid white — covering the ink nozzles and vent
hole. (If you do not remove the white tape, the ink will be
depleted prematurely.)
Be careful not to touch the ink nozzles or the copper contacts; fin-
gerprints may damage them.
●
Next, place the
color
cartridge into the
cartridge holder
on the right as
shown:
First slide in
the bottom until it
clicks into place.
Then push the
top forward until
the cartridge snaps
into place.
Cover
1
2
1
2