HP Officejet 600 All-in-One Printer - Manual (Page 113)

7-15
7.
Getti
n
g H
elp
Press START to re-
enter date, or STOP to
skip. While the HP OfficeJet
was disconnected from
your computer, you
entered an invalid date
on the HP OfficeJet’s
keypad.
The current date will be
entered on the header
of the faxes you send,
so accuracy is
important.
Press the Start button to enter
a valid date, or re-connect to
your computer.
When you re-connect the HP
OfficeJet to your computer,
the current time and date will
be automatically sent to the
HP OfficeJet.
Press START to set
time/date, or
STOP to skip. The HP OfficeJet was
disconnected from your
computer and then lost
power, so you are being
prompted to manually
enter the current time
and date.
Note: The current time
and date will be entered
on the header of the
faxes you send, so
accuracy is important.
Press the Start button to begin
entering the current time and
date, or re-connect to your
computer.
Note: When the HP OfficeJet
is connected to your computer
(using the bi-directional
parallel cable that’s included
in the box), you won’t need to
set the date and time; the date
and time on the HP
OfficeJet’s message display
are automatically loaded from
your computer.
Receive failed While you were
receiving a fax, a
communication error
occurred between the
HP OfficeJet and the
sending fax machine.
Failed transmissions
are most often caused
by “noise” on the
telephone line.
If you know the identity of the
person sending the fax, call
and ask them to resend it.
This keypad
message:
Has this meaning:
And this action is
recommended: