Edit a scanned image, Edit a scanned preview image, Edit a scanned photo or graphic – HP Photosmart C7200 Series User Manual

Page 119: Edit a scanned document

Advertising
background image

you to use the photo print options to print borderless prints and album pages from the
scanned image.

NOTE:

If the HP All-in-One is connected to a network, you can access the scanned

image only if the card or device is being shared across the network.

To save a scan to a memory card or storage device

1.

Make sure your memory card is inserted into the appropriate slot on the HP All-in-
One, or a storage device is connected to the front USB port.

2.

Load your original print side down on the right front corner of the glass.

3.

Press the Scan Menu button.

4.

Press to highlight Scan to Memory Card, and then press OK.
The HP All-in-One scans the image and saves the file to the memory card or storage
device in the JPEG format.

Edit a scanned image

You can edit a scanned image using the software you installed with the HP All-in-One.
You can also edit a scanned document by using your Optical Character Recognition
(OCR) software.

NOTE:

If you are using HP Photosmart Essential, the Optical Character Recognition

(OCR) software might not be installed on your computer. To install the OCR software,
you must re-insert the software disk and select OCR under the Custom installation
options.

This section contains the following topics:

Edit a scanned preview image

Edit a scanned photo or graphic

Edit a scanned document

Edit a scanned preview image

You can use the tools in the HP Scanning software to modify a preview image. Any
changes that you make, such as brightness, image type, resolution, and more apply only
to this scan session.
You can make additional changes in the HP Photosmart software after the image is
scanned.

Edit a scanned photo or graphic

You can edit a scanned photo or graphic using the software you installed with the HP All-
in-One. Using this software, you can rotate or crop the image, as well as adjust the
brightness, contrast, and color saturation.

Edit a scanned document

Scanning text (also known as optical character recognition or OCR) enables you to bring
the content of magazine articles, books, and other printed matter into your favorite word
processor and many other programs as fully editable text. Learning to work with OCR

Chapter 9

118

Use the scan features

Scan

Advertising
This manual is related to the following products: