Change the fax resolution – HP Photosmart C7200 Series User Manual

Page 138

Advertising
background image

To send a color fax from the control panel

1.

Load your originals print side up into the document feeder tray. If you are sending a
single-page fax, such as a photograph, you can also load your original print side down
on the glass.

NOTE:

If you are sending a multiple-page fax, you must load the originals in the

document feeder tray. You cannot fax a multiple-page document from the glass.

2.

Enter the fax number by using the keypad.

TIP:

To add a pause in the fax number you are entering, press the Symbols

(*) button repeatedly until a dash (-) appears on the display.

3.

Press Start Fax Color.

If the device detects an original loaded in the automatic document feeder,
the HP All-in-One sends the document to the number you entered.

If the device does not detect an original loaded in the automatic document
feeder
, the Feeder Empty prompt appears. Make sure your original is loaded
print side down on the glass, and then press to highlight Fax original from
scanner glass
, and press OK.

NOTE:

If the recipient's fax machine only supports black-and-white faxes, the HP All-

in-One automatically sends the fax in black and white. A message appears after the
fax has been sent indicating that the fax was sent in black and white. Press OK to
clear the message.

Change the fax resolution and

Lighter/Darker

settings

You can change the Resolution and Lighter/Darker settings for documents that you are
faxing.

NOTE:

These settings do not affect copy settings. Copy resolution and lightness/

darkness are set independently from fax resolution and lightness/darkness. Also, the
settings that you change from the control panel do not affect faxes you send from your
computer.

This section contains the following topics:

Change the fax resolution

Change the Lighter/Darker setting

Set new default settings

Change the fax resolution

The Resolution setting affects the transmission speed and quality of faxed black-and-
white documents. If the receiving fax machine does not support the resolution you have
chosen, the HP All-in-One sends faxes at the highest resolution supported by the
receiving fax machine.

NOTE:

You can only change the resolution for faxes that you are sending in black

and white. The HP All-in-One sends all color faxes using Fine resolution.

Send a fax

137

Fax

Advertising
This manual is related to the following products: