HP Photosmart C7200 Series - Manual (Page 180)

Cause: The print head assembly is blocked.
Solution: There might be some packing material inside the HP All-in-One. Turn the
HP All-in-One off and open the ink cartridge door. Remove any objects that are
blocking the print head assembly (including any packing materials), and then turn the
HP All-in-One on again. Follow the prompts on the display or the computer screen to
continue.
Software installation troubleshooting
Use this section to solve any problems you might encounter while setting up the HP All-
in-One software.
This section contains the following topics:
• When I insert the CD-ROM into my computer’s CD-ROM drive, nothing happens
• The minimum system checks screen appears
• A red X appears on the USB connect prompt
• I received a message that an unknown error has occurred
• The registration screen does not appear
• Uninstall and reinstall the software
• Missing HP Photosmart Software
When I insert the CD-ROM into my computer’s CD-ROM drive, nothing happens
Cause: The installation failed to run automatically.
Solution: If the installation does not run automatically, you can start it manually.
To start the installation from a Windows computer
1. From the Windows Start menu, click Run (or click Accessories, and then Run).
2. In the Run dialog box, enter d:\setup.exe, and then click OK.
If your CD-ROM drive is not assigned to drive letter D, enter the appropriate drive
letter.
The minimum system checks screen appears
Cause: Your system does not meet the minimum requirements to install the
software.
Solution: Click Details to see what the specific problem is, and then correct the
problem before attempting to install the software.
A red X appears on the USB connect prompt
Cause: Normally, a green check appears indicating that the usb connection is
successful. A red X indicates that the usb connection failed.
Software installation troubleshooting 179
Trou
bles
ho
ot
ing