HP Deskjet 990cxi Printer - Manual (Page 4)

4
Printing Basics: Paper Trays
Paper Trays
IN Tray
You place paper and other media types for printing in the IN tray.
Pull out this tray for easy loading. Once you insert the media you
want to use, slide the paper guides so they rest snugly against the
media. Make sure to slide all media as far as it will go into the IN
tray. Make sure the IN tray is pushed back in.
OUT Tray
The printer sends its completed pages to the OUT tray. The OUT
tray has two different positions.
Down – For most types of printing (except banners). The down
position also allows single envelope printing.
Up – For ease of loading media in the IN tray and for banner
printing.
OUT Tray Extension – For printing a large number of pages. In
addition, it must be extended when you are printing in draft mode
to prevent paper from falling to the floor. To use the Out Tray
Extension, gently pull out the extension. When your print job
finishes, push the OUT Tray Extension back into its storage slot.
NOTE: Do not use the OUT Tray Extension with legal-sized paper. It
may cause a paper jam.
Load paper in
the IN tray.
Paper width guide
Paper length guide
IN tray pushed in
IN tray pulled out
Printed media
is sent to the
OUT tray.
Single envelope slot
OUT tray down
OUT Tray Extension