HP Color LaserJet CM1015CM1017 Multifunction Printer series - Manual (Page 123)

If yes, the problem is workstation-specific. Verify that both workstations are using the same network
settings.
CAUTION Do not assign identical TCP/IP addresses to two network devices on the same
network.
5. If network communication is not resolved by using steps 1 through 3, or if other users can not print,
reset all network configuration settings to factory-defaults by selecting Restore defaults from the
control panel. After the MFP automatically power cycles, wait four to six minutes and verify that the
network functionality is working properly. Contact the network administrator for more information.
ENWW Set up the MFP and use it on the network 109