HP Color LaserJet CM1015CM1017 Multifunction Printer series - Manual (Page 53)

Install Macintosh printing system software for direct connections
(USB)
Install the Apple PostScript driver that came with the Macintosh computer to use the PPD files.
To install the printing system software
1. Connect a USB cable between the USB port on the MFP and the USB port on the computer. Use
a standard 5-meter (16.4 feet) or less, certified USB cable.
2. Insert the MFP CD into the CD-ROM drive and run the installer.
Double-click the CD icon on the desktop.
3. Double-click the Installer icon in the HP LaserJet Installer folder.
4. Follow the instructions on the computer screen.
NOTE For Mac OS X v10.3 and later: USB queues are created automatically when the
MFP is attached to the computer. However, the queue uses a generic PPD if the installer
has not been run before the USB cable is connected. To change the queue PPD, open the
Print Center or MFP Setup Utility, select the correct MFP queue, then click Show Info to
open the Printer Info dialog box. In the pop-up menu, select Printer Model, then, in the
pop-up menu in which Generic is selected, select the correct PPD for the MFP.
5. Print a test page or a page from any software program to make sure that the software is correctly
installed.
ENWW Macintosh utility and application support 39