HP Color LaserJet CM1015CM1017 Multifunction Printer series - Manual (Page 38)

Control-panel menus
Use the control-panel menus
To gain access to the control-panel menus, use the following steps.
1. Press Menu .
2. On the HP Color LaserJet CM1015 MFP, press Left arrow or Right arrow to navigate the listings.
On the HP Color LaserJet CM1017 MFP, press Up arrow or Down arrow to navigate the listings.
● Press OK to select the appropriate option.
● Press Cancel to cancel an action or return to the Ready state.
● Press Back to move to the previous menu.
Control-panel menu map
These menus are available from the control panel Main menu:
● Use the Copy setup menu to configure basic copy default qualities.
● Use the Reports menu to print reports that provide information about the printer.
● Use the Photo setup menu to configure defaults for photo printing.
● Use the System setup menu to establish basic printer settings. The System setup has several
sub-menus. Each is described in the table.
● Use the Service menu to restore default settings, clean the printer, and activate special modes
that affect print output.
● Use the Network config. menu to configure network settings.
Table 3-1 Copy Setup Menu
Menu item Sub-menu item Sub-menu item Description
Default Quality Sets the default copy quality.
Default light/dark Sets the default lighter/darker
option.
Default Reduce/Enlarge Sets the default percentage to
reduce or enlarge a copied
document.
Default # of copies Sets the default number of
copies.
Advanced Color Balance Red
Green
Blue
Increases or decreases the
amount of these colors in the
output.
Background Increases or decreases the
background color in a copy.
24 Chapter 3 Control panel ENWW