HP Color LaserJet CM1015CM1017 Multifunction Printer series - Manual (Page 217)

To restore the factory-set defaults
1. Press Menu .
2. Press the navigation arrows to select Service, then press OK .
3. Press the navigation arrows to select Restore defaults, then press OK .
The MFP automatically restarts.
Clean the paper path
The MFP features a special cleaning mode to clean the paper path.
NOTE If you have access to HP ToolboxFX, HP recommends cleaning the paper path by
using HP ToolboxFX.
To clean the paper path
1. Press Menu .
2. Press the navigation arrows to select Service, then press OK .
3. Press the navigation arrows to select Cleaning mode, then press OK .
A page feeds slowly through the MFP. Discard the page when the process is completed.
4. Load plain letter or A4 paper when prompted.
5. Press OK again to confirm and begin the cleaning process.
A page feeds through the MFP slowly. Discard the page when the process is completed.
Calibrate the MFP
Calibrations are performed at regular intervals. For best print quality, a calibration can be performed
from the control panel. For more information about calibrating the MFP, see
Calibrate the MFP from the
front control panel .
ENWW Additional problem solving tools 203