HP Color LaserJet CM1015CM1017 Multifunction Printer series - Manual (Page 177)

Cartridge-out override
The HP Color LaserJet CM1015/CM1017 MFP displays an Order supplies message when a cartridge
is running low and a Replace supplies message when a cartridge has been depleted. To ensure
optimal print quality, HP recommends replacing a cartridge when the Replace supplies message
is displayed. Replacing the cartridge at this point can help prevent waste of media or other cartridges
when one cartridge produces poor print quality.
The Cartridge-out override feature allows the MFP to continue to use a cartridge that has reached the
recommended replacement point.
WARNING! Using override can result in unsatisfactory print quality and unavailability of certain
features (such as toner remaining information).
WARNING! All print defects or supply failures incurred when an HP supply is used in override
are not considered defects in materials or workmanship in the supply under HP's Print Cartridge
Limited Warranty Statement. For Warranty information, see
Print Cartridge Limited Warranty
Statement .
Configuration
Cartridge-out override can only be enabled from the control-panel menu.
1. From the main menu, press the navigation arrows to choose System setup and press OK .
2. Press the navigation arrows to choose Print quality and press OK .
3. Press the navigation arrows to choose Replace supplies and press OK .
4. Press the navigation arrows to choose Override out and press OK .
5. Press OK .
If Stop at out is chosen, the MFP stops printing when a cartridge reaches the recommended
replacement point. When Override out is selected, the MFP continues printing when a cartridge reaches
the recommended replacement point. The factory default setting is Stop at out.
On-going operation
Override can be enabled or disabled at any time, and does not have to be re-enabled for each cartridge.
The MFP automatically continues printing when a cartridge reaches recommended replacement. The
MFP displays the message Replace supply. Override in use. while a cartridge is used in Override
mode. When the cartridge is replaced with a new supply, Override de-activates until another cartridge
reaches recommended replacement.
ENWW Cartridge-out override 163