HP Color LaserJet CM1015CM1017 Multifunction Printer series - Manual (Page 30)

For instructions on loading labels, see Load tray 1 (single-sheet feed tray) or Load tray 2 .
Transparencies
● Use only tray 1 or tray 2 to print on transparencies.
● For tray, media orientation, and driver settings, see Print on special media .
● Place transparencies on a flat surface after removing from the MFP.
● Use only transparencies specified for use with HP Color LaserJet printers.
CAUTION To avoid MFP damage, only use transparencies that are recommended for use in
laser MFPs. See Accessories and supplies information .
Transparent print media not designed for LaserJet printing melts in the fuser, and damages the
fuser.
Glossy paper and photo paper
● Handle glossy paper and HP LaserJet Photo paper by the edges.
● For tray, media orientation, and driver settings, see Print on special media .
● Use only glossy paper and photo paper specified for use with HP Color LaserJet printers.
Letterhead or preprinted forms
● Avoid using raised or embossed letterhead.
● Use only non-flammable inks that do not damage the print rollers.
● For tray, media orientation, and driver settings, see Print on special media .
For instructions on loading letterhead, see Load tray 1 (single-sheet feed tray) and Load tray 2 .
Heavy paper
● Do not use paper that is heavier than the recommended media specification for this MFP. See
Media supported on this MFP for more information.
● For tray, media orientation, and driver settings, see Print on special media .
16 Chapter 2 Print media ENWW