22 chapter 3 control panel enww – HP Color LaserJet CM1015CM1017 Multifunction Printer series User Manual
Page 36
4
Cancel
(X): Whenever the
Ready
light blinks, press to cancel a print job. Pressing this button also exits the
control-panel menus.
5
Right arrow
(>): Press to navigate to the next submenu or the next value in the menu selection list. Also
allows cursor movement forward a single position, or increments a numeric entry.
6
Down arrow
(v): Press to navigate to the menu item below the current menu item.
7
Start Photo
: Press to print one or more photos.
8
Proofsheet
: Press to print a proofsheet.
9
Start Scan
: Starts scanning to the previously selected e-mail or folder destination. The MFP can also start
a scan if a destination is not specified.
10
# of Copies
: Press the navigation arrows to increase or decrease the number of copies produced.
11
Lighter/Darker
: Press
Left arrow
to lighten the copy or the
Right arrow
to darken the copy.
12
Press
Start Copy
Color
to begin a color copy job.
13
Press
Start Copy
Black
to begin a monochrome copy job.
14
Reduce/Enlarge
: Displays a list of temporary copy and size changes.
15
Copy Features
: Displays a menu of copy features.
16
Scan To
: Displays a list of pre-configured folders and e-mail destinations. To create a new destination, set
up the
Scan To
destination on the workstation.
17
Select Photos
: Press to choose one or more photos.
18
Photo Features
: Press to navigate to select photo features.
19
Return to previous menu or menu item
: Backs up one menu screen or one step in the current menu structure.
20
Left arrow
(<): Press to navigate to the previous submenu or the previous value in the menu selection list.
Also allows cursor movement back a single position, deletes the previous character, or decrements a
numeric entry.
21
Menu
: Opens the main menu system.
22
Ready light
(green): Green light is steady when the MFP can accept print jobs or blinks when the MFP
receives print data.
23
OK
:
●
Selects a menu item
●
Clears some printer-errors
●
Acknowledges use of a non-HP supply
22
Chapter 3 Control panel
ENWW