HP Color LaserJet 9500 Printer series - Manual (Page 120)

http://www.hp.com/support/lj9500
118 Chapter 6 – Solving problems Rev. 1.0
WARNING
Avoid touching the fusing area above the duplexer. It can be hot.
6 Reach far into the duplexer area and remove any media that you find there.
7 Reinstall the duplexer by sliding it into the printer until it locks into place.
8 Close the lower left door. If an optional output device is installed, push it
back into place.
Note
Any time a jam occurs in the fuser area (including the lower left door area),
the printer automatically sends a cleaning page through the paper path to
remove loose toner.
6
7
8