HP Color LaserJet 9500 Printer series - Manual (Page 153)

ENWW Interpreting control panel messages 151
6
RAM DISK FILE
OPERATION FAILED
alternates with
READY
The requested operation could not be
performed. You might have attempted an
illegal operation, such as trying to
download a file to a nonexistent directory. Try again with a different file or
directory.
RAM DISK FILE
SYSTEM IS FULL
alternates with
READY
The RAM disk has reached maximum
capacity. Delete files and then try again, or turn
the printer off and then turn the printer
on to delete all files on the disk. (Delete
files by using HP Web Jetadmin or
another software utility. See the
Help
for more information.)
If the message persists, increase the
size of the RAM disk and change the
RAM disk size from the Configuration
menu at the printer control panel.
RAM DISK
IS WRITE PROTECTED
alternates with
READY
The RAM disk is protected, and no new
files can be written to it. Contact the network administrator.
RESEND UPGRADE An error exists in the printer firmware
flash. Resend a valid firmware image.
ROM DISK DEVICE FAILURE
alternates with
READY
The ROM disk had a critical failure and
can no longer be used. Turn the printer off, and then turn the
printer on to clear the message.
Message Description or explanation Recommended action