HP Color LaserJet 9500 Printer series User Manual
Page 158
156 Chapter 6 – Solving problems
Rev. 1.0
20 INSUFFICIENT MEMORY
TO CONTINUE PRESS
The printer received more data than can fit
in its available memory. You might have
tried to transfer too many macros, soft
fonts, or complex graphics.
Press
to print the transferred data
(some data might be lost), and then
simplify the print job or install additional
memory.
21 PAGE TOO
COMPLEX
alternates with
TO CONTINUE PRESS
The page-formatting process was not fast
enough for the printer.
Press
to print the transferred data.
(Some data might be lost.)
The page protection item appears in
the
CONFIGURE DEVICE - DEFAULTS -
EVENTS
menu, and should be set to
ON
to print the page.
When the page is successfully printed,
PAGE PROTECT=ON
, should be set back
to
AUTO
.
If this message appears often, simplify
the print job.
22 EIO X
BUFFER OVERFLOW
Too much data was sent to the EIO card in
the specified slot (
X
). An improper
communications protocol might be in use.
Press
to print the transferred data.
(Some data might be lost.)
Check the host configuration. If this
message persists, contact an
HP-authorized service or support
provider. (See “Customer support
options worldwide” on page 214, or go
to
.)
Message
Description or explanation
Recommended action