Printing a job – HP Color LaserJet 9500 Printer series User Manual
Page 34
32 Chapter 3 – What you can do
Rev. 1.0
5
Type a name and location for the desktop printer icon and click OK.
Note
Once the icon is on the desktop (or saved elsewhere), printer options need to be manually configured. This
step is essentially the same as selecting Configure after setting up a printer in the Chooser. To set the
options, highlight the Desktop Printer icon and select Change Setup from the Printing menu.
Printing a job
1
Align your laptop computer (or other portable device equipped with an IRDA-compliant FIR window) within
1 meter (3 feet) maximum of the optional HP Fast InfraRed Receiver. The FIR window must be at an angle of within
+/- 15 degrees relative to the printer to ensure an effective connection for printing.
2
Print the job. The status indicator on the optional HP Fast InfraRed Receiver lights up, and, after a short delay, the
printer control panel displays
PROCESSING JOB
.
If the status indicator does not light up, realign the optional HP Fast InfraRed Receiver with the FIR port on the sending
device, resend the print job, and maintain the alignment of all devices. If you have to move the equipment, make sure that
all of the devices remain within the range of operation to maintain the connection.